Flexi Innex - Exterior/Interior Wall Primer

Directions for use

1. Cleaning: Ensure the surface is clean and dry. Sand the surface with sand paper 180 to remove loose particles, paint, dust, grease and cracked or flaked paint. Wipe the surface clean.
2. Thin Hippo Flexi Innex Exterior/Interior Wall Primer as per the recommended dilution ratio.
3. Primer 1st coat: Apply a coat of diluted Hippo Flexi Innex Exterior/Interior Wall Primer
4. Allow drying for 4-5 hours.
5. Putty [optional]: Fill up minor dents, cracks and undolation with thin coat of wall putty. Allow drying time for 4-6 hours. Smoothen with sand paper 220/320 and wipe the surface clean.
6. Primer 2nd coat: Apply 2nd coat of diluted Flexi Innex Exterior/Interior Wall Primer.
7. Allow drying for 4-5 hours. Sand lightly with sand paper 320/400.Wipe the surface clean.

Recommended Dilution Ratio: Up to 1:1 mixing with potable water depending on the application consistency required and nature of the surface.

Safety, Health and Environment Information

1. Keep container upright and tightly closed in a cool, dry and well-ventilated.
2. Keep out of reach of children. Do not store near food, drinks or animal feed.
3. Dispose unwanted paint safely. Use sand or earth to contain any paint spillage
4. Wash all tools immediately after application.
5. Wear appropriate attire, gloves, eye protection and nose mask.
6. Work in a well-ventilated area. DO NOT BREATHE VAPOUR OR SPRAY.

AVOID contact with skin as it may cause irritation. In the case of accidental contact, wash area immediately with water and immediate medical attention.

Weather Guard - Exterior Wall Primer

Directions for use

1. Cleaning: Ensure the surface is clean and dry. Sand the surface with sand paper 180 to remove loose particles, paint, dust, grease and cracked or flaked paint. Wipe the surface clean.
2. Thin Weather Guard Exterior Wall Primer as per the recommended dilution ratio.
3. Primer 1st coat: Apply a coat of diluted Weather Guard Exterior Wall Primer
4. Allow drying for 4-5 hours.
5. Putty [optional]: Fill up minor dents, cracks and undolation with thin coat of wall putty. Allow drying time for 4-6 hours. Smoothen with sand paper 220/320 and wipe the surface clean.
6. Primer 2nd coat: Apply 2nd coat of diluted Weather Guard Exterior.
7. Allow drying for 4-5 hours. Sand lightly with sand paper 320/400.Wipe the surface clean.

Recommended Dilution Ratio: Up to 1:1 mixing with potable water depending on the application consistency required and nature of the surface.

Safety, Health and Environment Information

1. Keep container upright and tightly closed in a cool, dry and well-ventilated place.
2. Keep out of reach of children. Do not store near food, drinks or animal feed.
3. Dispose unwanted paint safely. Use sand or earth to contain any paint spillage
4. Wash all tools immediately after application.
5. Wear appropriate attire, gloves, eye protection and nose mask.
6. Work in a well-ventilated area. DO NOT BREATHE VAPOUR OR SPRAY.

AVOID contact with skin as it may cause irritation. In the case of accidental contact, wash area immediately with water and immediate medical attention.

Harmony - Interior Acrylic Emulsion

Directions for use

1. Cleaning: Sand surface with sand paper 120 to remove loose, cracked or flaked paint, paint dust, dirt, grease and wipe clean.
2. Primer: Apply a coat of Hippo Flexi Innex Exterior/Interior Wall Primer. Allow to dry for 6-8 hours.
3. Putty: Smoothen surface by filling dents with thin coats of wall putty. Allow drying for 4-6 hours. Sand with sand paper 180 and wipe clean.
4. Primer: Apply a coat of Hippo Flexi Innex Exterior/Interior Wall Primer. Allow to dry for 6-8 hours.
5. Light sand with sand paper 320/400 and wipe clean.
6. Top coat: Thin 1 litre of Harmony Interior Acrylic Emolsion with 400-450ml of water. Apply 2-3 coats of paint with an interval of 4 hours between successive.

Safety, Health and Environment Information

1. Keep container upright and tightly closed in a cool, dry and well-ventilated.
2. Keep out of reach of children. Do not store near food, drinks or animal feed.
3. Dispose unwanted paint safely. Use sand or earth to contain any paint spillage
4. Wash all tools immediately after application.
5. Wear appropriate attire, gloves, eye protection and nose mask.
6. Work in a well-ventilated area. DO NOT BREATHE VAPOUR OR SPRAY.

AVOID contact with skin as it may cause irritation. In the case of accidental contact, wash area immediately with water and immediate medical attention.

Machismo - Exterior Emulsion

Directions for use

1. Cleaning: Sand surface with sand paper 120 to remove loose, cracked or flaked paint, paint dust, dirt, grease and wipe clean.
2. Primer: Apply a coat of Weather Guard Exterior Wall Primer. Allow to dry for 6-8 hours.
3. Putty: Smoothen surface by filling dents with thin coats of wall putty. Allow drying for 4-6 hours. Sand with sand paper 180 and wipe clean.
4. Primer: Apply a coat of Weather Guard Exterior Wall Primer. Allow to dry for 6-8 hours.
5. Light sand with sand paper 320/400 and wipe clean.
6. Top coat: Thin 1 litre of Machismo Exterior Emolsion with 400-450ml of water. Apply 2-3 coats of paint with an interval of 4 hours between successive.

Safety, Health and Environment Information

1. Keep container upright and tightly closed in a cool, dry and well-ventilated.
2. Keep out of reach of children. Do not store near food, drinks or animal feed.
3. Dispose unwanted paint safely. Use sand or earth to contain any paint spillage
4. Wash all tools immediately after application.
5. Wear appropriate attire, gloves, eye protection and nose mask.
6. Work in a well-ventilated area. DO NOT BREATHE VAPOUR OR SPRAY.

AVOID contact with skin as it may cause irritation. In the case of accidental contact, wash area immediately with water and immediate medical attention.

Hercules - Luxury Exterior Acrylic Emulsion

Directions for use

1. Cleaning: Sand surface with sand paper 120 to remove loose, cracked or flaked paint, paint dust, dirt, grease and wipe clean.
2. Primer: Apply a coat of Flexi Innex Exterior/Interior Wall Primer. Allow to dry for 6-8 hours.
3. Putty: Smoothen surface by filling dents with thin coats of wall putty. Allow drying for 4-6 hours. Sand with sand paper 180 and wipe clean.
4. Primer: Apply a coat of Flexi Innex Exterior/Interior Wall Primer. Allow to dry for 6-8 hours.
5. Light sand with sand paper 320/400 and wipe clean.
6. Top coat: Thin 1 litre of Hercoles Luxury Exterior Acrylic Emolsion with 400-450ml of water. Apply 2-3 coats of paint with an interval of 4 hours between successive.

Safety, Health and Environment Information

1. Keep container upright and tightly closed in a cool, dry and well-ventilated place.
2. Keep out of reach of children. Do not store near food, drinks or animal feed.
3. Dispose unwanted paint safely. Use sand or earth to contain any paint spillage
4. Wash all tools immediately after application.
5. Wear appropriate attire, gloves, eye protection and nose mask.
6. Work in a well-ventilated area. DO NOT BREATHE VAPOUR OR SPRAY.

AVOID contact with skin as it may cause irritation. In the case of accidental contact, wash area immediately with water and immediate medical attention.

Hummer - Premium Exterior Emulsion

Directions for use

1. Cleaning: Sand surface with sand paper 120 to remove loose, cracked or flaked paint, paint dust, dirt, grease and wipe clean.
2. Primer: Apply a coat of Weather Guard Exterior Wall Primer. Allow to dry for 6-8 hours.
3. Putty: Smoothen surface by filling dents with thin coats of wall putty. Allow drying for 4-6 hours. Sand with sand paper 180 and wipe clean.
4. Primer: Apply a coat of Weather Guard Exterior Wall Primer. Allow to dry for 6-8 hours.
5. Light sand with sand paper 320/400 and wipe clean.
6. Top coat: Thin 1 litre of Hummer Premium Exterior Emolsion with 400-450ml of water. Apply 2-3 coats of paint with an interval of 4 hours between successive.

Safety, Health and Environment Information

1. Keep container upright and tightly closed in a cool, dry and well-ventilated.
2. Keep out of reach of children. Do not store near food, drinks or animal feed.
3. Dispose unwanted paint safely. Use sand or earth to contain any paint spillage
4. Wash all tools immediately after application.
5. Wear appropriate attire, gloves, eye protection and nose mask.
6. Work in a well-ventilated area. DO NOT BREATHE VAPOUR OR SPRAY.

AVOID contact with skin as it may cause irritation. In the case of accidental contact, wash area immediately with water and immediate medical attention.

Haze - Premium Interior Emulsion

Directions for use

1. Cleaning: Sand surface with sand paper 120 to remove loose, cracked or flaked paint, paint dust, dirt, grease and wipe clean.
2. Primer: Apply a coat of Hippo Flexi Innex Exterior/Interior Wall Primer. Allow to dry for 6-8 hours.
3. Putty: Smoothen surface by filling dents with thin coats of wall putty. Allow drying for 4-6 hours. Sand with sand paper 180 and wipe clean.
4. Primer: Apply a coat of Hippo Flexi Innex Exterior/Interior Wall Primer. Allow to dry for 6-8 hours.
5. Light sand with sand paper 320/400 and wipe clean.
6. Top coat: Thin 1 litre of Hippo Haze Premium Interior Emolsion with 400-450ml of water. Apply 2-3 coats of paint with an interval of 4 hours between successive.

Safety, Health and Environment Information

1. Keep container upright and tightly closed in a cool, dry and well-ventilated place.
2. Keep out of reach of children. Do not store near food, drinks or animal feed.
3. Dispose unwanted paint safely. Use sand or earth to contain any paint spillage
4. Wash all tools immediately after application.
5. Wear appropriate attire, gloves, eye protection and nose mask.
6. Work in a well-ventilated area. DO NOT BREATHE VAPOUR OR SPRAY.

AVOID contact with skin as it may cause irritation. In the case of accidental contact, wash area immediately with water and immediate medical attention.

Highness - Luxury Interior Emulsion

Directions for use

1. Cleaning: Sand surface with sand paper 120 to remove loose, cracked or flaked paint, paint dust, dirt, grease and wipe clean.
2. Primer: Apply a coat of Weather Guard Exterior Wall Primer. Allow to dry for 6-8 hours.
3. Putty: Smoothen surface by filling dents with thin coats of wall putty. Allow drying for 4-6 hours. Sand with sand paper 180 and wipe clean.
4. Primer: Apply a coat of Weather Guard Exterior Wall Primer. Allow to dry for 6-8 hours.
5. Light sand with sand paper 320/400 and wipe clean.
6. Top coat: Thin 1 litre of Highness Luxury Interior Emolsion with 400-450ml of water. Apply 2-3 coats of paint with an interval of 4 hours between successive.

Safety, Health and Environment Information

1. Keep container upright and tightly closed in a cool, dry and well-ventilated.
2. Keep out of reach of children. Do not store near food, drinks or animal feed.
3. Dispose unwanted paint safely. Use sand or earth to contain any paint spillage
4. Wash all tools immediately after application.
5. Wear appropriate attire, gloves, eye protection and nose mask.
6. Work in a well-ventilated area. DO NOT BREATHE VAPOUR OR SPRAY.

AVOID contact with skin as it may cause irritation. In the case of accidental contact, wash area immediately with water and immediate medical attention.